ETC Selador Desire D40XT x7 Fixture

ETC Selador Desire D40XT x7 Fixture
  • Item #: SELD40 0
  • Manufacturer: ETC - Electronic Theatre Controls

Your lighting doesn’t always stay indoors. You’re working outside at festivals, theme parks, video shoots, and architectural installations – and are at the mercy of Mother Nature and changing weather conditions. You require high-quality lighting products that can safely go where you go. That’s why ETC designed the Desire™ D40XT fixture. It isn’t just an ordinary LED wrapped in a waterproof body, however. ETC designed every aspect of the D40XT fixture to withstand heat, cold, rain and snow, without skimping on lighting features.

The durable Desire D40XT luminaire has an IP (Ingress Protection) rating of 65, meaning that the unit’s housing completely protects the electrical components from dust, water and the formation of ice, and can withstand temperatures ranging from -20°C to 40°C (-4°F to 104°F). From coatings and seals, to vents and cord grips, the D40XT fixture’s hardware can stand up to extreme temperatures, UV rays, and atmospheric changes. And the luminaire’s attached cabling is UL Listed for extra-hard usage and outdoor ratings.

ETC didn’t stop there. The D40XT luminaire offers the same brilliant lighting as the standard D40 fixture, with 40 high-efficiency emitters on each unit. The D40XT includes a user-interface with an expanded LCD display for control options. Quick Setups – General, Stage, XT (Exterior)/Architectural, High-Impact, and Studio – simplify your lighting tasks, by giving specific operating behaviors for any application.

ETC built the x7 Color System™ – which combines up to seven different LED colors on one unit – into the D40XT fixture so you can take dazzling colored and crisp white light outdoors where you need it. Producing a light quality you’ve never seen before from an LED, the x7 Color System carefully balances its lighting to give you a range of adjustable color options to fit your needs.

Desire D40XT color arrays:

Vivid™ - The Desire Vivid fixture is the high-brightness, color powerhouse of the D40XT array options. If you need deep, saturated color for your outdoor installations, choose the D40XT Vivid luminaire.

Lustr®+ - For beautiful, pure white light and rich color, choose the D40XT Lustr+ array. The Lustr+ luminaire – with adjustable white and tinted light – is the ideal theatrical-quality fixture for lighting talent outdoors or highlighting architectural features on building exteriors.

Fire™ and Ice™ - If your installation calls for daring, spectrum-specific lighting, the Selador Desire D40XT Fire and Ice fixtures are your low-power option. The Fire array’s rubies, ambers and golds, and the Ice luminaire’s sapphires, emeralds and lavenders make a bold statement for any exterior application.

* 40 x 2.5W LED color mixing wash fixture
* IP65-rated for exterior wet location use
* Power and DMX in/thru connections for easy setup
* User-friendly control interface with multiple modes and fixture settings

* Rugged die-cast all-metal housing
* Easy access slots for secondary lenses and standard 7.5” PAR accessories
* Available in black (standard), white or silver (optional) or custom colors
* Hanging yoke standard. Optional yoke/floor stand available

* 100VAC to 240VAC 50/60 Hz universal power input
* Waterproof, 39”power in and thru outdoor rated power leads
* Up to 10 fixtures may be linked via power in/thru connectors per 15A circuit
* Requires power from a non-dim source

* Primary field angle of 17° and beam angle of 8°
* Secondary lenses available for multiple beam spread options
* Sealed, factory-installed lenses available for permanent installations (special order)
* lenses must be ordered separately

* DMX512 in and thru via watertight five-pin XLR connectors on 39” leads
* Multiple control options including RGB, strobe, and console- free Master/Slave mode
* 15-bit virtual dimming engine provides smooth, high quality theatrical fades and minimizes color shift during dimming
* RDM functionality for address and setting changes

* Ambient operating temperature of -4° to 104°F (-20°- 40°C)
* Active electronic thermal management for droop-free operation
* Noiseless, fan-free convection cooling for acoustically sensitive installations
* Fixture is designed for continuous operation up to 40°C ambient temperature and requires free flow of air around fixture housing

* General- For General Purpose Use.
* Stage - Duplicates color and dimming balance of tungsten stage lighting fixtures, including red shift.
* XT Arch - Provides a high degree of color consistency in high ambient temperature enviroments.
* High Impact - built for event lighting this mode enables quick response dimming curve, simple RGB and strobe channel for maximum effect usage.
* Studio - Enables three parameter control of white light.

Unit comes with power lead of your choice and basic yoke.

Click here to go to ETC's Website to find out more information on these incredible fixtures

  * Marked fields are required.
Price $2,050.00
Reviews (0) Write a Review
No Reviews. Write a Review